ndif
#define CONSOLE_BAUD_RATE 57600


#undef INCLUDE_ENV_VARS /* unix compatable environment variables */
#undef INCLUDE_TIMEX /* timexLib for exec timing */
#undef INCLUDE_HW_FP
#undef INCLUDE_TFTP_CLIENT /* used by autoboot from ftp server*/

#define INCLUDE_SW_FP
#define INCLUDE_ELF
#define INCLUDE_NET_SHOW
#define INCLUDE_PING
#undef INCLUDE_DEMO /* only for vxWorks bsp test */
#define ETHERNET_ADR_SET /* only for bootrom used */
#define INCLUDE_USER_APPL /* Startup the user''s application in dos makefile project */
#undef PCIDEBUG

#ifdef INCLUDE_USER_APPL
#define USER_APPL_INIT _appEntry()
#endif

#endif /* INCconfigh */
#if defined(PRJ_BUILD)
#include "prjParams.h"
#endif

Makefile文件配置

# Makefile - make rules for board
#
#*/

CPU = PPC40x
TOOL = gnu

TGT_DIR=$(WIND_BASE)/target
include $(TGT_DIR)/h/make/defs.bsp
include $(TGT_DIR)/h/make/make.$(CPU)$(TOOL)
include $(TGT_DIR)/h/make/defs.$(WIND_HOST_TYPE)

## Only redefine make definitions below this point, or your definitions will
## be overwritten by the makefile stubs above.


TARGET_DIR = xxx
VENDOR = IBM
BOARD = xxx

RELEASE = vxWorks vxWorks.st bootrom_uncmp.hex

USR_ENTRY = usrInit


# ROM_TEXT_ADRS, ROM_SIZE, RAM_HIGH_ADRS, 和RAM_LOW_ADRS 在config.h,Makefile和Makefile.*文件中 # 都要定义,且必须要保持一致,

ROM_TEXT_ADRS = fff80100                 # ROM 起始地址
ROM_SIZE = 0007f000                      # ROM 空间大小

RAM_LOW_ADRS = 00010000                  # RAM 低地址 vxWorks */
RAM_HIGH_ADRS = 00C00000                 # RAM 高地址存储 bootrom */

HEX_FLAGS = -a 100

#ADDED_CFLAGS = -gdwarf -O0 # for debug

MACH_EXTRA = appentry.o                # 注意:这里加载用户的程序模块,程序调用在usrRoot()

BOOTCONFIG = bootconfig.c               # bsp bootconfig.c for bootrom


## Only redefine make definitions above this point, or the expansion of
## makefile target dependencies may be incorrect.

include $(TGT_DIR)/h/make/rules.bsp
include $(TGT_DIR)/h/make/rules.$(WIND_HOST_TYPE)

　 Tornado for x86下BSP的生成,下载和Target Server的配置实例，Pentium主机，3Com网卡，软盘引导，ftp下载VxWorks映像。

     1.在C:\Tornado\target\config\pcPentium目录下修改BSP文件config.h。

#elif (CPU_VARIANT == PENTIUM)
#define DEFAULT_BOOT_LINE 
"elt(0,0)HOST:c:\\Tornado\\target\\config\\pcPentium\\vxWorks 
h=90.0.0.3 e=90.0.0.50 u=target pw=target tn=target"

#define INCLUDE_ELT //3Com网卡
#define INCLUDE_END //END驱动

2.打开Tornado选择新建一个bootable vxworks image，选择建 A BSP，选择
  pcPentium，建完后编译就可以在相应的目录下生成vxworks的映像文件。

3.制作bootrom；选择Build Boot Rom，选择pcPentium,再选择bootrom_uncmp，
  生成 bootrom_uncmp。拷贝 bootrom_uncmp到host\x86-win32\bin下，插入空白
  盘到软区，在dos界面进入目录host\x86-win32\bin下，用命令"mkboot a: 
  bootrom_uncmp "生成引导盘 

4. 在Start > Programs > Tornado2 > FTP Server，点开Security下的
  user/rights菜单，新建用户User Name:target，Password:target，Home 
  Directory为VxWorks映像所在目录如 C:\Tornado\target\config\pcPentium\。
  注意这些配置要和config.h中的一致。

5.将bootrom的启动盘插入目标机的软驱，启动目标机，系统从软驱启动，随后登
  陆FTP，从主机下载vxworks文件，目标机提示7秒内按任意键选择Boot方式（手工
  ，自动），手工方式可对FTP用户，口令，IP等参数进行修改。
  通常是等待7秒后系统autoboot。
  

屏幕显示：

Attached TCP/IP interface to elt0.
Attaching network interface lo0... done. //TCP/IP网络连接成功

Loading... 602128 //通过ftp下载VxWorks映像
Starting at 0x01080000 //下载成功，从RAM_LOW_ADRS 0x01080000
开始执行VxWorks系统

Attached TCP/IP interface to elt unit 0
Attaching interface lo0...done //TCP/IP网络连接成功
(注意这里网络初始化成功和上边的不同，上边是Bootrom映像网络初始化来下载VxWorks,这里VxWorks系统初始化网络。)

VxWorks

Copyright 1984-1998 Wind River Systems, Inc.

CPU: xxxx --- Intel x82 
VxWorks: 5.4
BSP version: 1.2/4
Creation date: Jan xx 2001
WDB: Ready.

至此目标机系统启动完成。


6.配置Target Server下载应用程序.

打开Tornado，在Tools菜单下选择Target Sever再选择configure进行配置(Tools 
> Target Server > Configure > New)给出Target Server名字描述如net00.在
(Target Server Properties > Back End)选择WdbRpc. Target Name/IP Address 
框内输入Target的IP: 90.0.0.50. 
Core File and Symbols选项(Target Server Properties > Core File and 
Symbols)： C:\Tornado\target\config\pcPentium\vxWorks等等。
配置的内容根据系统的具体情况定。点击Launch启动Target Sever，随后在主界
面下选择已启动的Target Sever就可以下载 *.o或*.out程序。