目前我用VS2005定制intel 8255QM的网卡驱动,但是WINCE启动后看不到添加的网络连接
现在我做了以下几件事
第一我在platform.bib的MODULES中添加了
e100ce6.dll $(_FLATRELEASEDIR)\e100ce6.dll NK SHK
第二我在platform.reg中添加了
IF CEPB_INTELFE_PCI
;Create registry information for Intel(R) Miniport Driver
[HKEY_LOCAL_MACHINE\Comm\E100CE6]
"DisplayName"="Intel(R) Fast Ethernet Controller"
"Group"="NDIS"
"ImagePath"="e100ce6.dll"
;Create registry information for template (will be copied to ALL instances of
;adapters using the Intel Miniport Driver)
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCI\Template\E100CE6]
;PCI Bus Enumeration Information
"Class"=dword:02
"SubClass"=dword:00
"ProgIF"=dword:0
"VendorID"=multi_sz:"8086","8086","8086","8086","8086","8086","8086","8086","8086","8086","8086","8086","8086"
"DeviceID"=multi_sz:"1229","2449","1031","1032","1033","1034","1035","1036","1037","1038","1039","103A","103B"
"Dll"="NDIS.dll"
"Entry"="NdisPCIBusDeviceInit"
"Transceiver"=dword:3
"MiniPort"="E100CE6"
;Installable ISR Handler Information
"IsrDll"="giisr.dll"
"IsrHandler"="ISRHandler"
"PortIsIO"=dword:0
"PortOffset"=dword:0
"PortSize"=dword:2
"PortMask"=dword:FF00
;Settings for DHCP IP Configuration, if enabled
IF DHCP
[HKEY_LOCAL_MACHINE\COMM\PCI\E100CE61\Parms\TcpIp]
"EnableDHCP"=dword:1
; This should be MULTI_SZ
"DefaultGateway"=""
; Use zero for broadcast address? (or 255.255.255.255)
"UseZeroBroadcast"=dword:0
; This should be MULTI_SZ, the IP address list
"IpAddress"="0.0.0.0"
; This should be MULTI_SZ, the subnet masks for the above IP addresses
"Subnetmask"="0.0.0.0"
ENDIF ;//DHCP
;Settings for static IP configuration, if enabled
IF STATIC_IP
[HKEY_LOCAL_MACHINE\COMM\PCI\E100CE61\Parms\TcpIp]
"EnableDHCP"=dword:0
; This should be MULTI_SZ
"DefaultGateway"="1.2.3.0"
; Use zero for broadcast address? (or 255.255.255.255)
"UseZeroBroadcast"=dword:0
; This should be MULTI_SZ, the IP address list
"IpAddress"="1.2.3.4"
; This should be MULTI_SZ, the subnet masks for the above IP addresses
"Subnetmask"="255.0.0.0"
ENDIF ;//Static IP
[HKEY_LOCAL_MACHINE\Comm\E100CE6B]
"DisplayName"="Intel(R) Fast Ethernet Controller"
"Group"="NDIS"
"ImagePath"="e100ce6.dll"
;Create registry information for template (will be copied to ALL instances of
;adapters using the Intel Miniport Driver)
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCI\Template\E100CE6B]
;PCI Bus Enumeration Information
"Class"=dword:02
"SubClass"=dword:00
"ProgIF"=dword:0
"VendorID"=multi_sz:"8086","8086","8086","8086","8086","8086","8086","8086","8086","8086","8086"
"DeviceID"=multi_sz:"103C","103D","103E","1050","1051","1052","1053","1054","1055","1056","1057"
"Dll"="NDIS.dll"
"Entry"="NdisPCIBusDeviceInit"
"Transceiver"=dword:3
;Installable ISR Handler Information
"IsrDll"="giisr.dll"
"IsrHandler"="ISRHandler"
"PortIsIO"=dword:0
"PortOffset"=dword:0
"PortSize"=dword:2
"PortMask"=dword:FF00
;Settings for DHCP IP Configuration, if enabled
IF DHCP
[HKEY_LOCAL_MACHINE\COMM\PCI\E100CE6B1\Parms\TcpIp]
"EnableDHCP"=dword:1
; This should be MULTI_SZ
"DefaultGateway"=""
; Use zero for broadcast address? (or 255.255.255.255)
"UseZeroBroadcast"=dword:0
; This should be MULTI_SZ, the IP address list
"IpAddress"="0.0.0.0"
; This should be MULTI_SZ, the subnet masks for the above IP addresses
"Subnetmask"="0.0.0.0"
ENDIF ;//DHCP
;Settings for static IP configuration, if enabled
IF STATIC_IP
[HKEY_LOCAL_MACHINE\COMM\PCI\E100CE6B1\Parms\TcpIp]
"EnableDHCP"=dword:0
; This should be MULTI_SZ
"DefaultGateway"="1.2.3.0"
; Use zero for broadcast address? (or 255.255.255.255)
"UseZeroBroadcast"=dword:0
; This should be MULTI_SZ, the IP address list
"IpAddress"="1.2.3.4"
; This should be MULTI_SZ, the subnet masks for the above IP addresses
"Subnetmask"="255.0.0.0"
ENDIF ;//Static IP
[HKEY_LOCAL_MACHINE\Comm\E100CE6C]
"DisplayName"="Intel(R) Fast Ethernet Controller"
"Group"="NDIS"
"ImagePath"="e100ce6.dll"
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCI\Template\E100CE6C]
;PCI Bus Enumeration Information
"Class"=dword:02
"SubClass"=dword:00
"ProgIF"=dword:0
"VendorID"=multi_sz:"8086","8086","8086","8086","8086","8086","8086","8086"
"DeviceID"=multi_sz:"1064","1065","1066","1067","1068","1069","106A","106B"
"Dll"="NDIS.dll"
"Entry"="NdisPCIBusDeviceInit"
"Transceiver"=dword:3
;Installable ISR Handler Information
"IsrDll"="giisr.dll"
"IsrHandler"="ISRHandler"
"PortIsIO"=dword:0
"PortOffset"=dword:0
"PortSize"=dword:2
"PortMask"=dword:FF00
;Settings for DHCP IP Configuration, if enabled
IF DHCP
[HKEY_LOCAL_MACHINE\COMM\PCI\E100CE6C1\Parms\TcpIp]
"EnableDHCP"=dword:1
; This should be MULTI_SZ
"DefaultGateway"=""
; Use zero for broadcast address? (or 255.255.255.255)
"UseZeroBroadcast"=dword:0
; This should be MULTI_SZ, the IP address list
"IpAddress"="0.0.0.0"
; This should be MULTI_SZ, the subnet masks for the above IP addresses
"Subnetmask"="0.0.0.0"
ENDIF ;//DHCP
;Settings for static IP configuration, if enabled
IF STATIC_IP
[HKEY_LOCAL_MACHINE\COMM\PCI\E100CE6C1\Parms\TcpIp]
"EnableDHCP"=dword:0
; This should be MULTI_SZ
"DefaultGateway"="1.2.3.0"
; Use zero for broadcast address? (or 255.255.255.255)
"UseZeroBroadcast"=dword:0
; This should be MULTI_SZ, the IP address list
"IpAddress"="1.2.3.4"
; This should be MULTI_SZ, the subnet masks for the above IP addresses
"Subnetmask"="255.0.0.0"
ENDIF ;//Static IP
ENDIF ;//Intel(R) miniport registry additions.
第三我在项目的环境变量中添加了CEPB_INTELFE_PCI =1
第四我把下载的几个文件复制到了platform\cepc\files的目录下
第五 以前在5.0会有一个cec文件,但是6.0没有只有pbcxml,我用vs2005打开cec就报错,怎么改都不对,所以我也就没有转换,添加这个catalog.
但现在问题是在NK.BIN中可以看到网卡的DLL和注册表的信息，但是OS启动后看不到这个网卡的连接，希望大家能帮我解决这个问题，谢谢啊