共1 条记录, 每页显示 10 条, 页签:
[1]
[浏览完整版]
标题：2440 5.0BSP 移植到wince6.0 过程
1楼
wangxinxin 发表于：2010-11-16 9:35:21先编译后模拟器的精简版本，然后把模拟器的OAL相关的代码进行删除，换成5.0BSP的代码（把KITL相关的代码删除）并修改相应的sources文件。
二、把C:\WINCE500\PLATFORM\SMDK2440A\Src\Common代替H:\WINCE600\PLATFORM\QxCE6BSP\SRC\Common
C:\WINCE500\PLATFORM\SMDK2440A\Src\Inc代替H:\WINCE600\PLATFORM\QxCE6BSP\SRC\Inc
三、编译OAL的时候会调用H:\WINCE600\PLATFORM\QxCE6BSP\SRC\Common下的很多代码生成的lib，所以我现在首先编译H:\WINCE600\PLATFORM\QxCE6BSP\SRC\Common下面的所有代码，在VS2005 上点中Common然后右键选择“rebuild”，有错误了（有错误才是正常的，(*^__^*) 嘻嘻……）
BUILD: [01:0000000039:WARNN ] H:\WINCE600\PLATFORM\QxCE6BSP\src\common\Intr\.\intr.c(387) : warning C4013: 'NKCallIntChain' undefined; assuming extern returning int
BUILD: [01:0000000040
ROGC ] Compiling .\fiq.c
BUILD: [00:0000000045ROGC ] Building COMPILE Pass in H:\WINCE600\PLATFORM\QxCE6BSP\src\common\Intr_dvs\ directory.
BUILD: [01:0000000055ROGC ] Compiling .\intr.c
BUILD: [01:0000000058:WARNN ] H:\WINCE600\PLATFORM\QxCE6BSP\src\common\Intr_dvs\.\intr.c(637) : warning C4013: 'NKCallIntChain' undefined; assuming extern returning int
（这个VS2005 唯一不好的地方就是编译错误不是红色显示的）
出错地方
// First find if IRQ is claimed by chain
sysIntr = NKCallIntChain((UCHAR)irq);
晕，上面仅仅是警告，但是估计也有问题。跑到Common下打开build.err看看，有错误。
BUILD: [Thrd:Sequence:Type ] Message
BUILD: [01:0000000469:ERRORE] fal.lib(falmain.obj) : error LNK2019: unresolved external symbol FMDHOOK_UnhookInterface referenced in function DSK_Deinit
BUILD: [01:0000000470:ERRORE] fal.lib(falmain.obj) : error LNK2019: unresolved external symbol FMDHOOK_HookInterface referenced in function "void __cdecl GetFMDInterface(struct _DEVICE *)" (?GetFMDInterface@@YAXPAU_DEVICE@@@Z)
BUILD: [01:0000000471:ERRORE] H:\WINCE600\platform\QxCE6BSP\target\ARMV4I\debug\smflash.dll : fatal error LNK1120: 2 unresolved externals
怎么回事呢？
Src\Common\Smartmedia\Dll中的sources文件修改
在SOURCELIBS语句段中原有的两个库的基础上增加下面的库
$(_COMMONOAKROOT)\lib\$(_CPUINDPATH)\fmdhooklib.lib \
之后又有新的错误了。
BUILD: [Thrd:Sequence:Type ] Message
BUILD: [01:0000000423:ERRORE] H:\WINCE600\PLATFORM\QxCE6BSP\src\common\Smartmedia\Dll\sources(10) : U1033: syntax error : '$(_COMMONOAKROOT)\lib\$(_CPUINDPATH)\fal.lib' unexpected
BUILD: [01:0000000425:ERRORE] NMAKE.EXE TargetLibFiles -i -c BUILDMSG=Stop. BUILDROOT=H:\WINCE600\PLATFORM\QxCE6BSP CLEANBUILD=1 LINKONLY=1 NOPASS0=1 failed - rc = 2
晕倒，把sources换成ztg0021的那个就好了！
继续编译。
BUILD: [01:0000000030:ERRORE] H:\WINCE600\PLATFORM\QxCE6BSP\src\oal\OALLIB\.\init.c(55) : error C2065: 'dwNKDrWatsonSize' : undeclared identifier
晕倒我的没有extern DWORD dwNKDrWatsonSize;会提示dwNKDrWatsonSize未定义错误，加上就好了，但是ztg0021的却要屏蔽
extern DWORD dwNKDrWatsonSize 才行的。希望等下不要出乱子。
=================================使用ztg0021的改动OALEXE下面的sources导致好多错误=============================
BUILD: [Thrd:Sequence:Type ] Message
BUILD: [01:0000000056:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol pQueryPerformanceCounter
BUILD: [01:0000000057:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol pQueryPerformanceFrequency
BUILD: [01:0000000058:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol curridlehigh
BUILD: [01:0000000059:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol idleconv
BUILD: [01:0000000060:ERRORE] oal.lib(intr.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000061:ERRORE] oal_ioctl_s3c2440a.lib(reboot.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000062:ERRORE] oal.lib(args.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000063:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000064:ERRORE] oal_intr_s3c2440a.lib(intr.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000065:ERRORE] oal_rtc_s3c2440a.lib(rtc.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000066:ERRORE] oal.lib(init.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000067:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol dwReschedTime
BUILD: [01:0000000068:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol CurMSec
BUILD: [01:0000000069:ERRORE] oal_power_s3c2440a.lib(off.obj) : error LNK2019: unresolved external symbol OALKitlPowerOn referenced in function OEMPowerOff
BUILD: [01:0000000070:ERRORE] oal_power_s3c2440a.lib(off.obj) : error LNK2019: unresolved external symbol OALKitlPowerOff referenced in function OEMPowerOff
BUILD: [01:0000000071:ERRORE] oal_rtc_s3c2440a.lib(rtc.obj) : error LNK2019: unresolved external symbol SC_SetLastError referenced in function OALIoCtlHalInitRTC
BUILD: [01:0000000072:ERRORE] oal.lib(init.obj) : error LNK2019: unresolved external symbol OALKitlStart referenced in function OEMInit
BUILD: [01:0000000073:ERRORE] oal.lib(init.obj) : error LNK2001: unresolved external symbol dwNKDrWatsonSize
BUILD: [01:0000000074:ERRORE] oal.lib(init.obj) : error LNK2001: unresolved external symbol CEProcessorType
BUILD: [01:0000000075:ERRORE] oal.lib(ioctl.obj) : error LNK2001: unresolved external symbol OALIoCtlVBridge
BUILD: [01:0000000076:ERRORE] H:\WINCE600\platform\QxCE6BSP\target\ARMV4I\debug\oal.exe : fatal error LNK1120: 14 unresolved externals
BUILD: [01:0000000081:ERRORE] EDITBIN : fatal error LNK1104: cannot open file 'H:\WINCE600\platform\QxCE6BSP\target\ARMV4I\debug\oal.exe'
再次编译OALLib，莫名出现错误 3 Error: Found NULL or missing TOC pointer for nk.exe ？记得刚才是没有错误了的，真是郁闷。
重新编译整个OAL
build.err变成
BUILD: [Thrd:Sequence:Type ] Message
BUILD: [01:0000000127:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol pQueryPerformanceCounter
BUILD: [01:0000000128:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol pQueryPerformanceFrequency
BUILD: [01:0000000129:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol curridlehigh
BUILD: [01:0000000130:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol idleconv
BUILD: [01:0000000131:ERRORE] oal.lib(intr.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000132:ERRORE] oal_ioctl_s3c2440a.lib(reboot.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000133:ERRORE] oal.lib(args.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000134:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000135:ERRORE] oal_intr_s3c2440a.lib(intr.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000136:ERRORE] oal_rtc_s3c2440a.lib(rtc.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000137:ERRORE] oal.lib(init.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000138:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol dwReschedTime
BUILD: [01:0000000139:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol CurMSec
BUILD: [01:0000000140:ERRORE] oal_power_s3c2440a.lib(off.obj) : error LNK2019: unresolved external symbol OALKitlPowerOn referenced in function OEMPowerOff
BUILD: [01:0000000141:ERRORE] oal_power_s3c2440a.lib(off.obj) : error LNK2019: unresolved external symbol OALKitlPowerOff referenced in function OEMPowerOff
BUILD: [01:0000000142:ERRORE] oal_rtc_s3c2440a.lib(rtc.obj) : error LNK2019: unresolved external symbol SC_SetLastError referenced in function OALIoCtlHalInitRTC
BUILD: [01:0000000143:ERRORE] oal.lib(init.obj) : error LNK2019: unresolved external symbol OALKitlStart referenced in function OEMInit
BUILD: [01:0000000144:ERRORE] oal.lib(init.obj) : error LNK2001: unresolved external symbol dwNKDrWatsonSize
BUILD: [01:0000000145:ERRORE] oal.lib(init.obj) : error LNK2001: unresolved external symbol CEProcessorType
BUILD: [01:0000000146:ERRORE] oal.lib(ioctl.obj) : error LNK2001: unresolved external symbol OALIoCtlVBridge
BUILD: [01:0000000147:ERRORE] H:\WINCE600\platform\QxCE6BSP\target\ARMV4I\debug\oal.exe : fatal error LNK1120: 14 unresolved externals
BUILD: [01:0000000152:ERRORE] EDITBIN : fatal error LNK1104: cannot open file 'H:\WINCE600\platform\QxCE6BSP\target\ARMV4I\debug\oal.exe'
参照ztg0021的帖子修改之后重新编译BSP下的Common，最后导致错Error: Found NULL or missing TOC pointer for nk.exe ？这是怎么回事呢？
现在整个BSP一起编译，还会出现如下错误，原因是KITL相关东西我现在还没有加上去。
BUILD: [Thrd:Sequence:Type ] Message
BUILD: [01:0000000557:ERRORE] oal_power_s3c2440a.lib(off.obj) : error LNK2019: unresolved external symbol OALKitlPowerOn referenced in function OEMPowerOff
BUILD: [01:0000000558:ERRORE] oal_power_s3c2440a.lib(off.obj) : error LNK2019: unresolved external symbol OALKitlPowerOff referenced in function OEMPowerOff
BUILD: [01:0000000559:ERRORE] oal.lib(init.obj) : error LNK2019: unresolved external symbol OALKitlStart referenced in function OEMInit
BUILD: [01:0000000560:ERRORE] H:\WINCE600\platform\QxCE6BSP\target\ARMV4I\debug\oal.exe : fatal error LNK1120: 3 unresolved externals
BUILD: [01:0000000565:ERRORE] EDITBIN : fatal error LNK1104: cannot open file 'H:\WINCE600\platform\QxCE6BSP\target\ARMV4I\debug\oal.exe'
屏蔽上述代码后，编译整个BSP，天啊，居然成功了，NK.bin和NK.nb0生成了。
下载到我的产品。晕！，LCD可以看见画面了！
串口信息如下。
Windows CE Kernel for ARM (Thumb Enabled) Built on Nov 24 2008 at 14:58:23
ProcessorType=0920 Revision=0
OEMAddressTable = 8022a8d0
DCache: 8 sets, 64 ways, 32 line size, 16384 size
ICache: 8 sets, 64 ways, 32 line size, 16384 size
Error Reporting Memory Reserved, dump size = 00020000
Setting up softlog at 0x836cc000 for 0x800 entries
Booting Windows CE version 6.00 for (ARM)
&pTOC = 805a1c1c, pTOC = 80247b04, pTOC->ulRamFree = 805a6000, MemForPT = 00001000
Old or invalid version stamp in kernel structures - starting clean!
Configuring: Primary pages: 12573, Secondary pages: 0, Filesystem pages = 6286
Booting kernel with clean memory configuration:
Memory Sections:
[0] : start: 805a8000, extension: 00007000, length: 0311d000
NKStartup done, starting up kernel.
Windows CE KernelInit
Reserve VM for kernel XIP DLls, first = c0010000, last = c02b0000
g_pprcNK == 0x8059faa0
Updated eptr->e32_vsize to = 00036000
Initializing Memory Mapped File Support
Scheduling the first thread.
Detecting VFP... VFP Not Found!
LoaderInit: Initialing loader
Updated eptr->e32_vsize to = 00036000
Updated eptr->e32_vsize to = 000a2000
Updated eptr->e32_vsize to = 00010000
PGPOOL: Reserved 768 pages for Loader pool
PGPOOL: Reserved 256 pages for File pool
OSAXST0: Platform Name = PLATFORM_TYPE
OSAXST1: >>> Loading Module 'kd.dll' (0x836B087C) at address 0xC0010000-0xC0045000 in Process 'NK.EXE' (0x8059FAA0)
KD: Starting kernel debugger software probe (KdStub) - KD API version 22
OSAXST1: >>> Loading Module 'NK.EXE' (0x8059FAA0) at address 0x80200000-0x80236000 in Process 'NK.EXE' (0x8059FAA0)
Message Queue support initialized, g_hMsgQHeap = d0080010
OSAXST1: >>> Loading Module 'filesys.dll' (0x8368B648) at address 0xC0180000-0xC0216000 in Process 'NK.EXE' (0x8059FAA0)
OSAXST1: >>> Loading Module 'k.fpcrt.dll' (0x8368B780) at address 0xC0160000-0xC0178000 in Process 'NK.EXE' (0x8059FAA0)
OSAXST1: >>> Loading Module 'fsdmgr.dll' (0x8368B8C8) at address 0xC0260000-0xC02A6000 in Process 'NK.EXE' (0x8059FAA0)
FSDMGR!DllMain: DLL_PROCESS_ATTACH
CertMod.dll not found, using old OEM Trust Model
FileSystem Starting - starting with clean file system
FSDMGR!STOREMGR_Initialize
FSDMGR!InitializeStoreAPI
FSDMGR!MountTable_t::RegisterVolumeName: Registered "StoreMgr" at index 2FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 2 (Name="StoreMgr", MountFlags=0x1)FSDMGR!InitializeROMFileSystem: File System=ROM
OSAXST1: >>> Loading Module 'romfsd.dll' (0x83674B70) at address 0xC0220000-0xC0227000 in Process 'NK.EXE' (0x8059FAA0)
FSDMGR!MountTable_t::RegisterVolumeName: Registered "ROM" at index 3FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 3 (Name="ROM", MountFlags=0x71)FSVOL: Opening existing volume
FSVOL: Volume heap already initialized
FSREG: Mounted ROM portion of boot registry
FSVOL: Creating clean virtual volume
FSVOL: Initializing volume heap
FSREG: Mounted RAM portion of boot registry
FS: Creating signal event ReleaseFSD
FSREG: Unable to read value "Start DevMgr" under HKEY_LOCAL_MACHINE\init\BootVars
FILESYS: Starting boot phase 0.
FSDMGR!STOREMGR_StartBootPhase BootPhase=0 (PrevBootPhase=-1)
FSDMGR: File security disabled.
FSDMGR!AutoLoadFileSystems: CurrentBootPhase=0, LoadFlags=1
FSDMGR!AutoLoadFileSystem: CurrentBootPhase=0, RootKey=System\StorageManager\AutoLoad, FileSystem_t=ObjectStore
FSDMGR!PNPThread: Using PNPUnloadDelay of 4096
FSDMGR!PNPThread: PNPThread starting!
FILESYS: RAM File System FSD_MountDisk registering folder "Object Store"
FSDMGR!MountTable_t::RegisterVolumeName: Registered "Object Store" at index 4FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 4 (Name="", MountFlags=0x46)FILESYS:
二、把C:\WINCE500\PLATFORM\SMDK2440A\Src\Common代替H:\WINCE600\PLATFORM\QxCE6BSP\SRC\Common
C:\WINCE500\PLATFORM\SMDK2440A\Src\Inc代替H:\WINCE600\PLATFORM\QxCE6BSP\SRC\Inc
三、编译OAL的时候会调用H:\WINCE600\PLATFORM\QxCE6BSP\SRC\Common下的很多代码生成的lib，所以我现在首先编译H:\WINCE600\PLATFORM\QxCE6BSP\SRC\Common下面的所有代码，在VS2005 上点中Common然后右键选择“rebuild”，有错误了（有错误才是正常的，(*^__^*) 嘻嘻……）
BUILD: [01:0000000039:WARNN ] H:\WINCE600\PLATFORM\QxCE6BSP\src\common\Intr\.\intr.c(387) : warning C4013: 'NKCallIntChain' undefined; assuming extern returning int
BUILD: [01:0000000040
ROGC ] Compiling .\fiq.cBUILD: [00:0000000045
ROGC ] Building COMPILE Pass in H:\WINCE600\PLATFORM\QxCE6BSP\src\common\Intr_dvs\ directory.BUILD: [01:0000000055
ROGC ] Compiling .\intr.cBUILD: [01:0000000058:WARNN ] H:\WINCE600\PLATFORM\QxCE6BSP\src\common\Intr_dvs\.\intr.c(637) : warning C4013: 'NKCallIntChain' undefined; assuming extern returning int
（这个VS2005 唯一不好的地方就是编译错误不是红色显示的）
出错地方
// First find if IRQ is claimed by chain
sysIntr = NKCallIntChain((UCHAR)irq);
晕，上面仅仅是警告，但是估计也有问题。跑到Common下打开build.err看看，有错误。
BUILD: [Thrd:Sequence:Type ] Message
BUILD: [01:0000000469:ERRORE] fal.lib(falmain.obj) : error LNK2019: unresolved external symbol FMDHOOK_UnhookInterface referenced in function DSK_Deinit
BUILD: [01:0000000470:ERRORE] fal.lib(falmain.obj) : error LNK2019: unresolved external symbol FMDHOOK_HookInterface referenced in function "void __cdecl GetFMDInterface(struct _DEVICE *)" (?GetFMDInterface@@YAXPAU_DEVICE@@@Z)
BUILD: [01:0000000471:ERRORE] H:\WINCE600\platform\QxCE6BSP\target\ARMV4I\debug\smflash.dll : fatal error LNK1120: 2 unresolved externals
怎么回事呢？
Src\Common\Smartmedia\Dll中的sources文件修改
在SOURCELIBS语句段中原有的两个库的基础上增加下面的库
$(_COMMONOAKROOT)\lib\$(_CPUINDPATH)\fmdhooklib.lib \
之后又有新的错误了。
BUILD: [Thrd:Sequence:Type ] Message
BUILD: [01:0000000423:ERRORE] H:\WINCE600\PLATFORM\QxCE6BSP\src\common\Smartmedia\Dll\sources(10) : U1033: syntax error : '$(_COMMONOAKROOT)\lib\$(_CPUINDPATH)\fal.lib' unexpected
BUILD: [01:0000000425:ERRORE] NMAKE.EXE TargetLibFiles -i -c BUILDMSG=Stop. BUILDROOT=H:\WINCE600\PLATFORM\QxCE6BSP CLEANBUILD=1 LINKONLY=1 NOPASS0=1 failed - rc = 2
晕倒，把sources换成ztg0021的那个就好了！
继续编译。
BUILD: [01:0000000030:ERRORE] H:\WINCE600\PLATFORM\QxCE6BSP\src\oal\OALLIB\.\init.c(55) : error C2065: 'dwNKDrWatsonSize' : undeclared identifier
晕倒我的没有extern DWORD dwNKDrWatsonSize;会提示dwNKDrWatsonSize未定义错误，加上就好了，但是ztg0021的却要屏蔽
extern DWORD dwNKDrWatsonSize 才行的。希望等下不要出乱子。
=================================使用ztg0021的改动OALEXE下面的sources导致好多错误=============================
BUILD: [Thrd:Sequence:Type ] Message
BUILD: [01:0000000056:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol pQueryPerformanceCounter
BUILD: [01:0000000057:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol pQueryPerformanceFrequency
BUILD: [01:0000000058:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol curridlehigh
BUILD: [01:0000000059:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol idleconv
BUILD: [01:0000000060:ERRORE] oal.lib(intr.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000061:ERRORE] oal_ioctl_s3c2440a.lib(reboot.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000062:ERRORE] oal.lib(args.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000063:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000064:ERRORE] oal_intr_s3c2440a.lib(intr.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000065:ERRORE] oal_rtc_s3c2440a.lib(rtc.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000066:ERRORE] oal.lib(init.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000067:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol dwReschedTime
BUILD: [01:0000000068:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol CurMSec
BUILD: [01:0000000069:ERRORE] oal_power_s3c2440a.lib(off.obj) : error LNK2019: unresolved external symbol OALKitlPowerOn referenced in function OEMPowerOff
BUILD: [01:0000000070:ERRORE] oal_power_s3c2440a.lib(off.obj) : error LNK2019: unresolved external symbol OALKitlPowerOff referenced in function OEMPowerOff
BUILD: [01:0000000071:ERRORE] oal_rtc_s3c2440a.lib(rtc.obj) : error LNK2019: unresolved external symbol SC_SetLastError referenced in function OALIoCtlHalInitRTC
BUILD: [01:0000000072:ERRORE] oal.lib(init.obj) : error LNK2019: unresolved external symbol OALKitlStart referenced in function OEMInit
BUILD: [01:0000000073:ERRORE] oal.lib(init.obj) : error LNK2001: unresolved external symbol dwNKDrWatsonSize
BUILD: [01:0000000074:ERRORE] oal.lib(init.obj) : error LNK2001: unresolved external symbol CEProcessorType
BUILD: [01:0000000075:ERRORE] oal.lib(ioctl.obj) : error LNK2001: unresolved external symbol OALIoCtlVBridge
BUILD: [01:0000000076:ERRORE] H:\WINCE600\platform\QxCE6BSP\target\ARMV4I\debug\oal.exe : fatal error LNK1120: 14 unresolved externals
BUILD: [01:0000000081:ERRORE] EDITBIN : fatal error LNK1104: cannot open file 'H:\WINCE600\platform\QxCE6BSP\target\ARMV4I\debug\oal.exe'
再次编译OALLib，莫名出现错误 3 Error: Found NULL or missing TOC pointer for nk.exe ？记得刚才是没有错误了的，真是郁闷。
重新编译整个OAL
build.err变成
BUILD: [Thrd:Sequence:Type ] Message
BUILD: [01:0000000127:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol pQueryPerformanceCounter
BUILD: [01:0000000128:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol pQueryPerformanceFrequency
BUILD: [01:0000000129:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol curridlehigh
BUILD: [01:0000000130:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol idleconv
BUILD: [01:0000000131:ERRORE] oal.lib(intr.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000132:ERRORE] oal_ioctl_s3c2440a.lib(reboot.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000133:ERRORE] oal.lib(args.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000134:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000135:ERRORE] oal_intr_s3c2440a.lib(intr.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000136:ERRORE] oal_rtc_s3c2440a.lib(rtc.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000137:ERRORE] oal.lib(init.obj) : error LNK2001: unresolved external symbol g_oalLogMask
BUILD: [01:0000000138:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol dwReschedTime
BUILD: [01:0000000139:ERRORE] oal_timer_s3c2440a.lib(timer.obj) : error LNK2001: unresolved external symbol CurMSec
BUILD: [01:0000000140:ERRORE] oal_power_s3c2440a.lib(off.obj) : error LNK2019: unresolved external symbol OALKitlPowerOn referenced in function OEMPowerOff
BUILD: [01:0000000141:ERRORE] oal_power_s3c2440a.lib(off.obj) : error LNK2019: unresolved external symbol OALKitlPowerOff referenced in function OEMPowerOff
BUILD: [01:0000000142:ERRORE] oal_rtc_s3c2440a.lib(rtc.obj) : error LNK2019: unresolved external symbol SC_SetLastError referenced in function OALIoCtlHalInitRTC
BUILD: [01:0000000143:ERRORE] oal.lib(init.obj) : error LNK2019: unresolved external symbol OALKitlStart referenced in function OEMInit
BUILD: [01:0000000144:ERRORE] oal.lib(init.obj) : error LNK2001: unresolved external symbol dwNKDrWatsonSize
BUILD: [01:0000000145:ERRORE] oal.lib(init.obj) : error LNK2001: unresolved external symbol CEProcessorType
BUILD: [01:0000000146:ERRORE] oal.lib(ioctl.obj) : error LNK2001: unresolved external symbol OALIoCtlVBridge
BUILD: [01:0000000147:ERRORE] H:\WINCE600\platform\QxCE6BSP\target\ARMV4I\debug\oal.exe : fatal error LNK1120: 14 unresolved externals
BUILD: [01:0000000152:ERRORE] EDITBIN : fatal error LNK1104: cannot open file 'H:\WINCE600\platform\QxCE6BSP\target\ARMV4I\debug\oal.exe'
参照ztg0021的帖子修改之后重新编译BSP下的Common，最后导致错Error: Found NULL or missing TOC pointer for nk.exe ？这是怎么回事呢？
现在整个BSP一起编译，还会出现如下错误，原因是KITL相关东西我现在还没有加上去。
BUILD: [Thrd:Sequence:Type ] Message
BUILD: [01:0000000557:ERRORE] oal_power_s3c2440a.lib(off.obj) : error LNK2019: unresolved external symbol OALKitlPowerOn referenced in function OEMPowerOff
BUILD: [01:0000000558:ERRORE] oal_power_s3c2440a.lib(off.obj) : error LNK2019: unresolved external symbol OALKitlPowerOff referenced in function OEMPowerOff
BUILD: [01:0000000559:ERRORE] oal.lib(init.obj) : error LNK2019: unresolved external symbol OALKitlStart referenced in function OEMInit
BUILD: [01:0000000560:ERRORE] H:\WINCE600\platform\QxCE6BSP\target\ARMV4I\debug\oal.exe : fatal error LNK1120: 3 unresolved externals
BUILD: [01:0000000565:ERRORE] EDITBIN : fatal error LNK1104: cannot open file 'H:\WINCE600\platform\QxCE6BSP\target\ARMV4I\debug\oal.exe'
屏蔽上述代码后，编译整个BSP，天啊，居然成功了，NK.bin和NK.nb0生成了。
下载到我的产品。晕！，LCD可以看见画面了！
串口信息如下。
Windows CE Kernel for ARM (Thumb Enabled) Built on Nov 24 2008 at 14:58:23
ProcessorType=0920 Revision=0
OEMAddressTable = 8022a8d0
DCache: 8 sets, 64 ways, 32 line size, 16384 size
ICache: 8 sets, 64 ways, 32 line size, 16384 size
Error Reporting Memory Reserved, dump size = 00020000
Setting up softlog at 0x836cc000 for 0x800 entries
Booting Windows CE version 6.00 for (ARM)
&pTOC = 805a1c1c, pTOC = 80247b04, pTOC->ulRamFree = 805a6000, MemForPT = 00001000
Old or invalid version stamp in kernel structures - starting clean!
Configuring: Primary pages: 12573, Secondary pages: 0, Filesystem pages = 6286
Booting kernel with clean memory configuration:
Memory Sections:
[0] : start: 805a8000, extension: 00007000, length: 0311d000
NKStartup done, starting up kernel.
Windows CE KernelInit
Reserve VM for kernel XIP DLls, first = c0010000, last = c02b0000
g_pprcNK == 0x8059faa0
Updated eptr->e32_vsize to = 00036000
Initializing Memory Mapped File Support
Scheduling the first thread.
Detecting VFP... VFP Not Found!
LoaderInit: Initialing loader
Updated eptr->e32_vsize to = 00036000
Updated eptr->e32_vsize to = 000a2000
Updated eptr->e32_vsize to = 00010000
PGPOOL: Reserved 768 pages for Loader pool
PGPOOL: Reserved 256 pages for File pool
OSAXST0: Platform Name = PLATFORM_TYPE
OSAXST1: >>> Loading Module 'kd.dll' (0x836B087C) at address 0xC0010000-0xC0045000 in Process 'NK.EXE' (0x8059FAA0)
KD: Starting kernel debugger software probe (KdStub) - KD API version 22
OSAXST1: >>> Loading Module 'NK.EXE' (0x8059FAA0) at address 0x80200000-0x80236000 in Process 'NK.EXE' (0x8059FAA0)
Message Queue support initialized, g_hMsgQHeap = d0080010
OSAXST1: >>> Loading Module 'filesys.dll' (0x8368B648) at address 0xC0180000-0xC0216000 in Process 'NK.EXE' (0x8059FAA0)
OSAXST1: >>> Loading Module 'k.fpcrt.dll' (0x8368B780) at address 0xC0160000-0xC0178000 in Process 'NK.EXE' (0x8059FAA0)
OSAXST1: >>> Loading Module 'fsdmgr.dll' (0x8368B8C8) at address 0xC0260000-0xC02A6000 in Process 'NK.EXE' (0x8059FAA0)
FSDMGR!DllMain: DLL_PROCESS_ATTACH
CertMod.dll not found, using old OEM Trust Model
FileSystem Starting - starting with clean file system
FSDMGR!STOREMGR_Initialize
FSDMGR!InitializeStoreAPI
FSDMGR!MountTable_t::RegisterVolumeName: Registered "StoreMgr" at index 2FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 2 (Name="StoreMgr", MountFlags=0x1)FSDMGR!InitializeROMFileSystem: File System=ROM
OSAXST1: >>> Loading Module 'romfsd.dll' (0x83674B70) at address 0xC0220000-0xC0227000 in Process 'NK.EXE' (0x8059FAA0)
FSDMGR!MountTable_t::RegisterVolumeName: Registered "ROM" at index 3FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 3 (Name="ROM", MountFlags=0x71)FSVOL: Opening existing volume
FSVOL: Volume heap already initialized
FSREG: Mounted ROM portion of boot registry
FSVOL: Creating clean virtual volume
FSVOL: Initializing volume heap
FSREG: Mounted RAM portion of boot registry
FS: Creating signal event ReleaseFSD
FSREG: Unable to read value "Start DevMgr" under HKEY_LOCAL_MACHINE\init\BootVars
FILESYS: Starting boot phase 0.
FSDMGR!STOREMGR_StartBootPhase BootPhase=0 (PrevBootPhase=-1)
FSDMGR: File security disabled.
FSDMGR!AutoLoadFileSystems: CurrentBootPhase=0, LoadFlags=1
FSDMGR!AutoLoadFileSystem: CurrentBootPhase=0, RootKey=System\StorageManager\AutoLoad, FileSystem_t=ObjectStore
FSDMGR!PNPThread: Using PNPUnloadDelay of 4096
FSDMGR!PNPThread: PNPThread starting!
FILESYS: RAM File System FSD_MountDisk registering folder "Object Store"
FSDMGR!MountTable_t::RegisterVolumeName: Registered "Object Store" at index 4FSDMGR!MountTable_t::RegisterVolume: Registered volume at index 4 (Name="", MountFlags=0x46)FILESYS:
共1 条记录, 每页显示 10 条, 页签:
[1]